EASY2506
Datasheet
EASY2506 (D)
CANopen-Guide (D)
Overview
Software
CoDeSys
FlashJet
Pricelists
EASY2506 is a powerful and universal applicable PLC. The device is suited for measuring-, regulation- and  peripheral controlling tasks or for intelligent I/O-modules. Typical application areas are e.g. electrical machines, measuring- and testing systems, industrial engine plants and electrical installations in buildings.

system

CPU 16 Bit (Infineon C167)
program memory 384kByte
data memory  256kByte
data memory EEPROM 16kByte EEPROM
Timekeeper or NV-RAM 128kByte (optional)
instructions per ms (Ø) 2000
power supply 18 .. 34V DC (typ. 24V DC)
connectors pluggable screw clamps (cage-clamp principle)
cable cross-section 0.08 .. 1.5mm (.. 2.5mm SV)
(AWG28 .. AWG16) (.. AWG14 SV)
temperature range 0 .. 70°C
housing aluminium or plastic  housing for mounting on carrier rail
measurements approx. (LxWxH) mm                                  (without clamp for carrier rail) 201,5 x 105 x 60

digital inputs

digital inputs 24V 16
input frequency range 1 kHz
status-LEDs yes
galvanical isolation yes 

digital outputs

digital outputs 24V 16
type of switching voltage 
type of load resistive, inductive, lamps
output current (at 25 °C) 1.5A
peak current 3A (max. 1 sec)
short circuit protection yes
status-LEDs yes
galvanical isolation yes

analog inputs

analog inputs 8
type voltage, current
input voltage range, input current range -10 .. +10V, 0(4) .. 20mA
resolution 12 bit
reference voltage (output) -10V and +10V (10mA)
galvanical isolation yes

analog outputs

analog outputs 4
type voltage, current
output range -10 .. +10V, 0(4) .. 20mA
resolution 12 bit
galvanical isolation yes

CANopen

CAN-bus 1
CAN-bus standard ISO11898 yes
CAN baudrates adjustable (up to 1Mbit)
node IDs adjustable (1 .. 127)
galvanical isolation CAN-bus yes
CANopen draft standard DS301 V4.0 (Master/Slave)
DSP302 V3.0 (Master)
DSP405 V2.0 (Master/Slave)
DS401 V2.1 (Slave)
CANopen diagnostic LEDs yes
PDOs receive/transmit 250/250 (Master), 16/16 (Slave)
SDOs server/client 1/1(Master), 1/0 (Slave)
PDO-Event timer yes
PDO-Inhibit timer yes
PDO transmission modes event related, synchronous, asynchronous, cyclical, acyclical, remote frame related
variable PDO-Identifier yes
dynamical PDO-Mapping yes
Emergency yes
Nodeguarding/Lifeguarding/Heartbeat yes/yes/yes
EDS-file yes (Slave)

interfaces

serial interfaces RS232 (1x)
RS232/RS485 (2x)

programming

programming system CoDeSys
syntax/standard IEC 61131-3
programming language AWL, KOP, FUP, AS, ST, CFC

ordering information

Item-no. Item serial interfaces galvanical isolation housing VE analog in-/outputs
EZ00000.1250.01 EASY2506CA 1 yes A   8/4
EZ00000.1255.01 EASY2506CA-P 1 yes K   8/4
EZ00000.1252.01 EASY2506CS 1 (RS232)
2 ( RS232/ RS485)		 yes A   8/4
EZ00000.1253.01 EASY2506VA 1 yes A yes 8/4
EZ00000.1254.01 EASY2506VS 1 (RS232)
2 ( RS232/ RS485)		 yes A yes 8/4
  VE: Additional connecting boards A: Aluminium housing
K: Plastic housing




top